54-Port 10G/40G Data Center Switch
DXS-5000-54S

Open network switch for data center and enterprise networks

  • 48 x 10G SFP+ ports
  • 6 x 40G QSFP+ ports
  • Wire-speed, ultra-low latency switching
  • Supports Open Network Install Environment (ONIE) for zero-touch installation of network OS
  • SDN-enabled with OpenFlow 1.3 support
  • Dual AC/DC hot-swappable power supply modules for 1+1 redundancy and load sharing
  • Modular n+1 hot-swappable fan design

  • 48 x 10G SFP+ ports
  • 6 x 40G QSFP+ ports
  • Wire-speed, ultra-low latency switching
  • Supports Open Network Install Environment (ONIE) for zero-touch installation of network OS
  • SDN-enabled with OpenFlow 1.3 support
  • Dual AC/DC hot-swappable power supply modules for 1+1 redundancy and load sharing
  • Modular n+1 hot-swappable fan design

Specifications

10G SFP+ ports 48
40G QSFP+ ports 6
USB 2.0 port 1
mini-USB port 1
RJ-45 Management port 1
Switch Capacity 1.44 Tbps
Max. Packet Forwarding Rate 1,071 Mpps
Maximum Heat Dissipation 1,006.58 BTU/hr
Maximum Power Consumption 295 W
MTBF 205,000 hours
Console Port 1 x mini-USB console port
Packet Buffer Memory 12 MB
Power Input 1+1 redundant power supply design Input: 100 to 240 V AC, 50/60 Hz
Operating Humidity 5% to 95% RH, non-condensing
MAC Address Table 288K
OOB Management Port 1 x 10/100/1000BASE-T RJ-45 port
Switching Capacity 1.44 Tbps
Weight 9 kg (19.8 lbs)
Dimensions (W x D x H) 440 x 406 x 44 mm (17.32 x 16 x 1.73 inch)
Acoustics Max: 74 dB Min: 62 dB
Interfaces "48 x 10G SFP+ ports 6 x 40G QSFP+ ports 1 x USB 2.0 port 1 x mini-USB port 1 x RJ-45 Management port "
Heat Dissipation (Max.) 1006.58 BTU/hr
Maximum Power Consumption 295 W
Storage Temperature -40 to 70 ºC (-40 to 158 ºF)
Storage Humidity 5% to 95% RH, non-condensing
Fans 4 x fans
MTBF 205,000 hours
Max. Forwarding Rate 1,071 Mpps (1.071 Bpps)
Operating Temperature 0 to 45 ºC (32 to 113 ºF)
Maximum Heat Dissipation 1,006.58 BTU/hr
DXS-5000-54S

High Availability and Reliability

The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.

Network Downtime

Open Networking

The 5000 Series switches support open networking, providing IT professionals with innovative third-party operating systems and software options. This lowers costs by separating software from hardware and increases network agility and flexibility. With support for standards-based tools and standards-based applications, open networking simplifies scalability and future-proofs the network.

Auto sensing

Flexibility and Versatility

The 5000 Series switches are available in a variety of high-capacity interface combinations, including 10G, 25G, 40G, and 100G ports to accommodate the scale and requirements of data centers. Open Network Install Environment (ONIE) support means the switches can be easily integrated in existing network ecosystems using a variety of supported third-party Network Operating Systems (NOSs) for optimal compatibility.

QOS

Tolly-Certified

Tolly, a leading global provider of third-party validation services for vendors of IT products and services, independently tested and verified the outstanding performance of the DXS-5000-54S.

“Tolly engineers verified wire-speed L2 throughput and latency across two ports of a 10GbE switch, verified rapid reconvergence times in multi-switch failover scenarios and validated nearly 50 features in areas including L2/L3, automation, VXLAN, QoS, DHCP, mirroring, analytics and management.”  

Configuration

Cost-Efficient with Dedicated Support

Compared to traditional switches, the 5000 Series offer a more cost-efficient solution through a lower initial purchasing cost combined with a reduced long term Total Cost of Ownership (TCO). The 5000 Series switches feature front-to-back and back-to-front airflow which optimizes air circulation inside the rack and facilitates the building of energy-efficient data centers by separating the hot and cold aisles. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures, optimizing power consumption.

Data center

Data Center and Virtualization Features

Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The D-Link OS for the 5000 Series switches supports several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, and VXLAN. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control on specific priority levels to ensure there is no data loss during network congestion.

Multicast Applications

Complete Layer 2/3 Functionality

The 5000 Series switches feature a complete L2 and L3 feature set to meet the demands of data center applications. Layer 2 features include L2 switching, L2 multicast, advanced Quality of Service (QoS), and robust security features. Meanwhile, the 5000 Series offers advanced L3 routing for enterprise integration, including OSPF, BGP, Graceful Restart, Bidirectional Forwarding Detection (BFD), and L3 multicast.

5000 Series Switches

Product
Interface
Performance
Switch Capacity
Max. Packet Forwarding Rate
PoE
PoE Budget
Technical Specification
Maximum Heat Dissipation
Maximum Power Consumption
MTBF
<% if(interface.length>0){ %>
    <% for (var i = 0; i < interface.length; i++) { %>
  • <%= interface[i] %>
  • <% } %>
<% }else{ %>
no
<%}%>
  • 48 x 10G SFP+ ports
  • 6 x 40G QSFP+ ports
  • 1 x USB 2.0 port
  • 1 x mini-USB port
  • 1 x RJ-45 Management port
  • 32 x 40G QSFP+ ports
  • 1 x USB 2.0 port
  • 1 x RJ-45 port
  • 1 x RJ-45 Management port
  • 32 x 100G QSFP28 ports
  • 1 x USB 2.0 port
  • 1 x RJ-45 port
  • 1 x RJ-45 Management port
Performance
<%= switch_capacity %>
1.44 Tbps
2.56 Tbps
6.4 Tbps
<%= max_packet_forwarding_rate %>
1,071 Mpps
1,428 Mpps
2,980 Mpps
PoE
<%= poe_budget %>
NO
NO
NO
Technical Specification
<%= maximum_heat_dissipation %>
1,006.58 BTU/hr
1,385.27 BTU/hr
1,433.04 BTU/hr
<%= maximum_power_consumption %>
295 W
406 W
420 W
<%= mtbf %>
205,000 hours
85,937 hours
206,685 hours